Preformed PE drains with pre welded EPDM slab by Elevate (Firestone). Quick to connect to the rainwater downpipe, in stock in six diameters from 50 to 125 mm.
The range
Preformed PE drain, 60 cm long with a pre welded American EPDM slab of 1.14 mm or 1.52 mm, manufactured by Elevate (Firestone). Cold vulcanised with RoofCover Primer+ and the included butyl seal ring, or supplied with an integrated adhesive strip. As an alternative the EPDM flap can be bonded with RoofCover RubberSeal. Fast to install, applied double sided with a roller or spray system.
Benefits
Compatible with most EPDM membranes
In stock in 6 diameters (50, 63, 75, 90, 110 and 125 mm)
Also available with integrated seal ring (EPDM slab 1.52 mm thick)
Can be installed horizontally or vertically
Fast and easy to install
Two versions
PE pipe of 60 cm with a pre welded EPDM slab 1.14 mm from manufacturer Elevate (Firestone) for connecting the rainwater downpipe. Cold vulcanised with the included butyl seal ring and Primer+. As an alternative the EPDM flap can be bonded with RoofCover RubberSeal. In stock in 6 diameters.
Physical properties
PE pipe of 60 cm with a self adhesive EPDM flap 1.52 mm from manufacturer Elevate (Firestone) for connecting the rainwater downpipe. Supplied with a pre integrated butyl adhesive strip. Always use Primer+ on the substrate before installing the drain. In stock in 5 diameters.
Physical properties
Available from
RoofCover products are distributed through our selected partners. Click a distributor to view their catalogue or order directly online.
